Acheson Welcomes CS Marks and Elfhunter
Cleaning & Painting Instructions
We use a urethane resin instead of polyester as it is stronger, nearly bubble-free and has no odor during the casting process.
We recommend that you wash the castings in warm, soapy water (dish wash detergent) using a soft brush or scouring pad to remove any oily surface materials from the casting process.
We recommend that you spray the castings with either a white or light gray matte oil-based primer. Then, finish the castings using either an acrylic or oil-based painter, or a combination of both. Then, as the final stage, spray the casting with a matte sealer.